-24%
Power Supply, 110V/220V to DC 12V 20A
400,00 EGP
MK8 PTFE Coated Nozzle 0.2mm - 1.0mm
Price range: 30,00 EGP through 50,00 EGP
BIGTREETECH TFT35 E3 V3.0 Touch Screen 12864 LCD Display WIFI Module For SKR MINI E3 V3.0 Octopus Pro Ender3 CR10 3D Printer
Original price was: 3.500,00 EGP.2.650,00 EGPCurrent price is: 2.650,00 EGP.
In stock
Compare
Subscription successful
You’re now subscribed to price tracking for this product. We’ll notify you if the price drops.
12
People watching this product now!
Description
BIGTREETECH TFT35 E3 V3.0 Touch Screen 12864 LCD Display WIFI Module For SKR MINI E3 V3.0 Octopus Pro Ender3 CR10 3D Printer
Specification
Appearance size:93*87mm
Microprocessor: GD32F205VCT6
Power Input: DC5V
SD card logic voltage:3.3V/5V
Weight: 109g
perfectly replace：perfectly replace the original LCD screen of Ender3 printer.
Main control chip：ARM Cortex-M3 Series GD32F205VCT6 Master Controller with 32-bit Main Frequency of 120MHz
Selected connect wire according to the firmware：Please connect different wire according to the firmware you burned.
-
When using serial touch screen mode,it connects with TFT or AUX-1 on the motherboard through RS232，which has touch function
-
When using class 12864 LCD mode,it connects with EXP3 of the motherboard,which has no touch function
-
When using class 12864 LCD mode,it connects with EXP1 and EXP2 of the motherboard,which has no touch function
Exquisite appearance：Better lighting effect after optimization
TWO Pinting methods：Serial port screen mode supports two printing modes: SD card and U disk
WIFl port：Reserve WIFl port,and WIFl function is realized by external WIFl module
Expand the port for users to DIY：2 sets of UART serial port extension ports are reserved for DIY use.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
CNC GRBL V1.0 Board W/ USB Cable for CNC/Laser Engraving/Writing Robot
Original price was: 800,00 EGP.750,00 EGPCurrent price is: 750,00 EGP.
DRV8825 Stepper Motor Driver With Heat sink
Original price was: 100,00 EGP.75,00 EGPCurrent price is: 75,00 EGP.
EZ Drive Easy Driver EZ2209 + Controller
Original price was: 500,00 EGP.400,00 EGPCurrent price is: 400,00 EGP.
Filament Break Detection Module 1.75MM Filament Detecting Module Extruder Cable 1M Run-out Material Sensor
Original price was: 150,00 EGP.75,00 EGPCurrent price is: 75,00 EGP.
Ramps1.6 R6 Control Main board
Original price was: 325,00 EGP.300,00 EGPCurrent price is: 300,00 EGP.
Reviews
Clear filtersThere are no reviews yet.