*When using the CNC VORON TAP V2 with the Carbon Fiber Tube Kit for Voron2.4 X-Axis (300)\ (350), an additional printed part is required to adjust the mounting position of the X-axis limit switch bracket. You can access the following link to obtain the print file:
https://github.com/Chaoticlab/CNC-Tap-for-Voron/tree/master/STL/CNC_VORON_TAP_V2
USE MANUAL:
https://github.com/Chaoticlab/CNC-Tap-for-Voron/tree/master/Manual
NOTE:
XY TRAVEL INFLUENCE:
The thickness of the CNC VORON TAP V2 is similar to that of the 2.4R2 X carriage, so no adjustments to the relevant settings are necessary.
HARDWARE REQUIREMENTS:
YOU MUST USE THE MGN12H X-AXIS
You must already be using the MGN12 based X-Axis. CNC VORON TAP V2 does not fit on the older MGN9 based X-axis.
CW2 STYLE MOUNTED EXTRUDER REQUIRED
CNC VORON TAP V2 replaces the X-carriage mount, and requires that the mounting screws come in from the front of the carriage like CW2, not the back like CW1. There are mounts for LGX and Galileo available.
BED MOUNT MUST BE SECURE
When CNC VORON TAP V2 is probing, the nozzle will contact the bed with a force of approximately 500-800 grams. Your bed should not move during this. Bed motion compromises the accuracy of CNC VORON TAP V2, so it is not recommended for Voron 1.8, Legacy, or Switchwire designs.
If you want to know if CNC VORON TAP V2 is right for you, tap your finger on the bed firmly. If the bed moves, CNC VORON TAP V2Â is not right for you.
GOOD MECHANICAL CONDITION
CNC VORON TAP V2 is far more precise than previous Z sensing systems, and we have found it can reveal previously unnoticed problems in a printer. If your printer has known mechanical issues (such as cracked components) fix them before.
